Hayashi Pure Chemical Ind.,Ltd.


Aug 28, 2012Company information

Information of SEMICON Taiwan 2012 Exhibition September 5th~7th, 2012

HAYASHI PURE CHEMICAL IND., LTD produces and provides various Acid・Alkaline and Solvent for Semiconductor Production, in addition to various Etchant・Resist Remover and Rinse Agents formulated and optimized for each process.

In the SEMICON Taiwan 2012 Exhibition, we will be mainly exhibiting Etchant for Ag Nanowire (For ITO Substitute Transparent Conductive Film) and GaN Film(N-face) Etchant for Surface Roughness (For Blue Color LED) in the booth of SUMITRONICS TAIWAN CO.,LTD.

Also we will be exhibiting Etchant for Various Materials shown as following.

Please visit SUMITRONICS TAIWAN Booth, and have time to take a look at our various products.

Please refer to detailed information below :
Date : Sept. 5th, 2012 (Wed.) ~ Sept. 7th, 2012 (Fri.)
Time : 10:00 ~ 17:00 (Sept. 5th and 6th)
10:00 ~ 16:00 (Sept. 7th)Site : TWTC Nangang Exhibition Hall 4th Floor
No.1, Jingmao 2nd Rd., Nangang District, Taipei CIty 11568, Taiwan (R.O.C.)Booth : SUMITRONICS TAIWAN CO.,LTD. Booth # 1270
SEMICON Taiwan Official Site : http://www.semicontaiwan.org/en/

《Exhibited Items》

  1. Etchant for Ag Nanowire (Transparent Conductive Film, ITO Substitute) 『Pure Etch GNW Series』
  2. GaN Film(N-face) Etchant for Surface Roughness(for Blue Color LED) 『Pure Etch F1000 Series』
  3. Etchant for Making Roughness on AlGaInP Film 『Pure Etch F100 Series』
  4. Etchant for Making Roughness on GaP Film・GaP Substrate 『Pure Etch F200 Series』
  5. Etchant for Making Roughness on AlGaAs Film・GaAs Film・GaAs Substrate 『Pure Etch F300 Series』
  6. Si Anisotropic Etchant 『Pure Etch 160』
  7. Al Taper Etchant (Taper Angle Controllable) 『Pure Etch NS Series』
  8. Si Single Crystalline Texture Etchant for Solar Cell 『Pure Etch T Series』
  9. Insulating Film Etchant (Al Damageless) 『Pure Etch ZE Series』

《Our Products》

In addition to above exhibit items, we can also provide following products.

  1. Etchant for Metal Film :
    Ag APC Al Au Mo Cr Cu Cu Alloy p-ITO a-ITO MoNb Ni Ta Ti W Si (for Isotropic Etching)
  2. Etchant for Metal Stacked Film:Mo/Al/Mo MoNb/Al/MoNb MoNb/AlNd/MoNb etc.
  3. Resist Remover for FPD of Cu, Al Film (Organic Solvent System, Water System)
  4. Remover for Color Filter Rework
  5. High Purity Chemicals:Acid Alkaline Solvent

◆ Contact Information

Contact Information:
TEL +81-6-6910-7336 FAX +81-6-6910-7330

To the top of the page